BANTAM E-STATION BC6 BALANCING CHARGER / DISCHARGER

• Features

Microprocessor controlled, high-performance with an integrated cell voltage balancer for NiCd, NiMH, Lithium and Pb batteries.

- Optimized operating software.

When charging or discharging, BC6 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

- Dual input power(12V + 240V)

BC6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A.

- Balance individual cells on discharge

BC6 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message

- Accept various types of Lithium battery

BC6 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- Lithium battery 'Fast' and 'Storage' mode

You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

- Data store/load For users convenience it can store maximum 5 data of different batteries.

You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- PC based analysis using USB communication For technical expert,

BC6 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

- Robust outer aluminum case

High-quality aluminium case is durable and very efficient to cool out the internal heat

- Specifications

• Operating voltage: DC 11~18 volts / AC 100~240V, 50/60Hz
• Charge/discharge power: max. 50/5 Watts
• NiCd/MH: 1~15 cells
• LiIo/LiPo/LiFe: 1~6 series
• Pb: 2~20V
• Charge current: 0.1 to 5.0A
• Discharge current: 0.1 to 1.0A
• No. of cycle: 1 to 5 times
• Battery data memory: up to 5 data
• Weight: 960g
• Dimension: 160x120x40 mm