Home > Browse By Brand > Losi > Nitro Range

Losi 8IGHT-T Nitro RTR: 1/8 4WD Truggy

Losi 8IGHT-T Nitro RTR: 1/8 4WD Truggy
   
Product Price: £489.00
Product Description

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi®
8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a
Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials
A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.

Centre and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Features:

  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminium chassis plate
  • Spektrum™ ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed diffs
  • Centre and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear throttle servo
  • Includes Spektrum DX2E DSMR® rdio
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Specification:

  • Type: 4WD Nitro Truggy
  • Completion Level: Ready To Run
  • Scale: 1/8
  • Length: 476mm (18.75 in)
  • Width: 416mm (16.4 in)
  • Height: 186mm (7.3 in)
  • Ground Clearance: 60mm (2.4 in)
  • Wheelbase: 379-383mm
  • Chassis: 4mm T-6 Aluminium
  • Suspension: Independent
  • Shock Type: 15mm Adjustable, Oil-Filled
  • Drivetrain: 4WD
  • Differentials: Sealed Viscous Gear
  • Wheel Type: Dish
  • Tyre Tread: XTT
  • Engine Size: .28
  • Pinion: 13T
  • Spur Gear: 50T
  • Gear Pitch: 1.0 MOD
  • Internal Gear Ratio: 3.91:1
  • Final Drive Ratio: 15:1
  • Brakes: Dual Disc
  • Body: 8IGHT-T™ Cab-Forward, Screened
  • Ball Bearings: Full Set
  • Experience Level: Intermediate
  • Environment: All-Terrain
  • Assembly Required: No

Needed to Complete:

  • 20–30% Nitromethane fuel
  • Fuel Bottle
  • NiMH Charger
  • Glow Igniter